Loading ...
Loading ...
Loading ...
en Overview of programmes
26
0 Settings
Programme
setting
Function
Note: Not all settings can be activated in every programme. The activated settings are displayed on the but-
tons or highlighted brightly in the display. You can change or deactivate the activated settings by repeatedly
pressing on the relevant buttons on the display.
} Pressing } allows you to start the appliance remotely via the Home Connect app or
to call up the Home Connect settings.
Notes
■ Please observe the instructions for the ambient temperatures ~ Page 65.
■ Remote start can only be activated if the appliance door is closed and the appli-
ance is connected to your home network.
■ Remote start is deactivated for safety reasons in the following circumstances:
■ Open the door,
■ Power failure,
■ Press A (Start/Pause) on the appliance,
■ Briefly press } again,
■ Press # to switch off the appliance.
ü ‰
(Drying Target):
The dryness level defines how damp or dry the laundry is after the programme ends.
If you have set a dryness level, this is retained even after the appliance has been
switched off for the relevant programme. Exception: The settings are not saved for
Cottons.
Ò Cupboard Dry
Plus
Multi-layered, thick laundry that does not dry readily.
» Cupboard Dry Normal, single-layered laundry.
ö Iron Dry Normal, single-layered laundry that still needs to be damp after drying and is suitable
for ironing or hanging up.
ô (Drying level) If you think the laundry is still too damp when the drying programme has ended, you
can adjust the degree of dryness to achieve a particular dryness level. To increase the
dryness level, set the degree of dryness to between 5 and 5 5 5. This extends
the programme duration but the temperature remains the same.
Once you have adjusted the degree of dryness for a dryness level, this setting is
retained even after the appliance is switched off.
M ñ ˜
(Finished in)
Before starting the programme, you can delay the time at which the programme
ends by up to 24 hours using M and N.
The set time in hours, e.g. 8 h, is shown in the display and counts down until the pro-
gramme starts. Once the programme has started, the programme duration is dis-
played.
Note: Observe the information about the ambient temperatures ~ Page 65.
M ñ ˜
(Finished in)
The drying time for \ timed programmes can be extended in 10-minute incre-
ments using M and N.
Loading ...
Loading ...
Loading ...