Loading ...
Loading ...
Loading ...
175
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
3
Choose shooting mode [ ], [ ],
[ ], or [ ].
z Flash settings can only be congured in
these modes. In other modes, the ash
is adjusted and red automatically, as
needed.
4
Congure the external ash.
z Press the [ ] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button.
z Options already set on the ash itself are
displayed.
z Press the [
][ ] buttons or turn the [ ]
dial to choose an item, and then set the
desired option.
z Available items vary depending on the
shooting mode and the ash attached
(
=
176).
● Settings for the built-in ash cannot be congured while a
Speedlite EX series ash is attached, because that setting screen
is no longer accessible.
● You can also access the setting screen by pressing the [
] button
for at least one second.
● 600EX-RT/580EX II only: [Flash Control] is not available if the
external ash has been set up for stroboscopic ash.
● 320EX only: Auto LED lighting is only available in low-light movie
recording or in Movie mode. In this case, the [
] icon is shown.
Using an External Flash (Sold Separately)
Still Images
Movies
More sophisticated ash photography is possible with an optional
Speedlite EX series ash. For movie shooting using an LED light, the
optional Speedlite 320EX ash is available.
● This camera does not support some Speedlite EX series
functions.
● Non-EX series Canon ash units may not re correctly or may not
re at all, in some cases.
● Use of non-Canon ash units (especially high-voltage ash units)
or ash accessories may prevent normal camera operation and
may damage the camera.
● Also refer to the Speedlite EX series manual for additional
information.
Speedlite EX Series
Still Images
Movies
These optional ash units can provide bright lighting and meet a variety of
ash photography needs.
1
Attach the ash.
z Make sure the camera is off, and then
attach the ash unit to the hot shoe.
2
Turn the ash on, and then turn the
camera on.
z A red [ ] icon is now displayed.
z The ash pilot lamp will light up when the
ash is ready.
Loading ...
Loading ...
Loading ...