Loading ...
Loading ...
Loading ...
OPERATION OF THE CUSTOM DISPENSER (continued)
(3)
OPERATION OF ICEMAKER (AUTOMATIC ICE-MAKING APPARATUS)
GE Icemaker (automatic ice-making apparatus) does not
require manual water supply. Following completion of
installation of the water supply piping system, lower the
feeler arm switch to “ON.” Ice is now automatically made
and the icemaker will automatically shut off when the bucket
is filled with set amount of ice.
Operation
21
1.While holding bottom of the icemaker compartment cover,
gently push upward.
2.Pull forward to remove the icemaker compartment cover
and ice bucket together.
To replace ice bucket, push it straight back until it clicks in
place. If the ice bucket does not seat completely due to an
interference of the rotating wing on the back wall, pivot the
rotating wing by hand approximately 1/3 turn and retry.
1. REMOVING THE ICE BUCKET
Any spilled ice or water will evaporate naturally from the
bottom of the custom dispenser. If juice or other liquid is
spilled, however, residues will remain even if the water has
evaporated. Remove the recess cover and wipe with a warm,
damp cloth.
2. CLEANING THE CUSTOM DISPENSER
Feeler Arm
Switch
ON
Ice Bucket
Wing
Recess
Cover
Loading ...
Loading ...
Loading ...