Loading ...
Loading ...
Loading ...
• Do not use the One Connect in the upside-down or upright position.
• When connecting the One Invisible Connection, use a Bending Cover, which
prevents the cable of the One Invisible Connection from being bent at a 90 degree
angle, to bend the cable. Failure to do so may cause damage to the cable.
• When connecting the One Invisible Connection, pay attention to the shapes and
sizes of its connectors so that they are connected correctly. Failure to do so may
cause product malfunction.
• When connecting the One Invisible Connection, be careful not to twist the cable of
the One Invisible Connection. Failure to do so may cause performance degradation
of the TV or damage to the cable.
• When arranging the remaining cable, refer to the figure on the previous page for
the correct arrangement.
• Take care not to subject the cable to any of the actions below. The One Invisible
Connection contains a power circuit. You could damage the cable and subject
yourself to an electric shock.
• Handle the One Connect box carefully. It is heavy.
Bending Twisting Pulling Pressing on Electric shock
CLASS 1 LASER PRODUCT (One Invisible Connection)
• Caution - Invisible laser radiation when open. Do not stare into beam.
– Do not bend the One Invisible Connection cable excessively. Do not cut the
cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
• Caution - Use of controls, adjustments, or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
3. Connect your peripherals (aerial, cable box, Blu-ray player, etc.) to the One Connect box.
See the Accessory Kit Guide for details.
English - 11
Loading ...
Loading ...
Loading ...