MEDX600XL User Manual

Loading ...

5. Setting modiers

The default cycle settings will be shown. For some cycles,

you may select alternate settings by pressing the button for that

setting. Time adjusts for Manual Cycles only.

NOTE: Not all modiers are available with all cycles.

Temp Level (for use with Timed Cycles only)

Press the TEMP LEVEL button to change the drying temperature

from the default setting. Press the (+) for more time or (-) less

time and the time will change by 1-minute intervals. Press and

hold (+) for more time or (-) less time and the time will change by

5-minute intervals.

Dryness Level (for use with Sensor Cycles only)

Normal dryness level is a good starting point for optimal energy

savings.

You can select a different dryness level, depending on your load,

by pressing the button for More, Normal, or Less. Selecting More,

Normal, or Less automatically adjusts the dryness level at which

the dryer will shut off. Once a dryness level is set, it cannot be

changed without stopping the cycle.

Sensor Dry cycles give the best drying in the shortest time. Drying

time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is

used for a starting point for sensor drying. Less Dry removes less

moisture and used for loads you may want to put on a hanger to

complete drying.

Wrinkle Prevent feature

n

Get up to 60 or 150 minutes for models with two choices,

90 minutes for models with only one choice of heat-free,

periodic tumbling at the end of a cycle. Press the WRINKLE

PREVENT button to turn ON or OFF at any time before the

cycle has ended.

n

The WRINKLE PREVENT feature is preset to “OFF.” If selected

for other cycles, the WRINKLE PREVENT feature setting will

remain “ON” the next time that cycle is selected.

3. Press POWER/CANCEL

Press the POWER/CANCEL button to turn on the dryer.

4. Select the desired cycle

Select the desired cycle for your load. See the “Cycle Guide”

or the display for more information about each cycle.

Loading ...

User Manual - Page 8