Loading ...
Loading ...
Loading ...
5
CONTROL PANEL & FEATURES
POWER/CANCEL BUTTON
Press to turn the dryer on and off.
DRYER CYCLE KNOB
Use your Dry Cycle Knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE BUTTON
Press to start a cycle, or press once while a cycle is in process
to pause it.
OPTIONS
Drum Light
Select Drum Light to turn on the light inside the dryer drum.
When pressed during a cycle or not running, the Drum Light
turns on and will remain on until DRUM LIGHT is pressed
again, or the door is opened and closed, or the door is left
open for 30 minutes.
Press DRUM LIGHT at any time to turn the drum light ON
or OFF.
Damp Dry Signal (for use with Sensor Cycles only)
Selecting the Damp Dry Signal will alert you when your
clothes are approximately 80% dry. This is useful when
you want to remove lightweight items in a mixed load to
avoid overdrying or remove partially dry items that may
need ironing.
End Signal
The End Signal produces an audible sound when the drying
cycle is nished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press END SIGNAL until the desired volume (Hi, Low, or Off)
is selected.
NOTE: When the Wrinkle Prevent setting is selected
and the End Signal is on, the tone will sound every
20 minutes until the clothes are removed, or the Wrinkle
Prevent setting ends.
1
2
3
MODIFIERS
Temp Level (for use with Timed Cycles only)
Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
NOTE: The Air Dry Temp Level Feature is not available on the
Sensor Cycles.
Dryness Level (for use with Sensor Cycles only)
Use the Dryness option to select dryness levels for the Sensor
Cycles only.
Wrinkle Prevent Feature
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
PREVENT feature periodically tumbles, rearranges, and uffs
the load to help keep wrinkles from forming.
n
Get up to 60 or 150 minutes for models with two choices,
90 minutes for models with only one choice of heat-free,
periodic tumbling at the end of a cycle. Press the WRINKLE
PREVENT button to turn ON or OFF at any time before the
cycle has ended.
Timed Dry (for use with Timed Cycles only)
Will run the dryer for the specied time on the control.
Depending on model, temperature may be selected on the
cycle knob or may be located on a separate control.
CYCLE STATUS LIGHTS
Lights indicate the progress of the drying cycles.
2 31
5
6
6
4
5
4
Not all features and options are available on all models.
Appearance may vary.
Loading ...
Loading ...
Loading ...