LG Electronics LMX28994ST Ultra Capacity 4 Door French Door Refrigerator

User Manual - Page 45

For LMX28994ST.

PDF File Manual, 55 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ENGLISH
45
BEFORE CALLING FOR SERVICE
(CONT.)
Problem Possible Causes Solutions
Food stored in
refrigerator
drawers freezes.
Temperatures in
the refrigerator or
freezer are too
warm.
Temperature in
the refrigerator
is too warm,
but the freezer
temperature is
satisfactory.
Louder sound
levels when
compressor
comes on.
Vibrating or
rattling noise.
Moisture collects
on the inside walls
of the refrigerator.
• Refrigerator control is set too
cold.
• Freezer or refrigerator control is
set too warm.
• Doors are opened too frequently
or for too long.
• The display shows “OFF” in
temperature indicating part.
• Door is slightly open.
• Large amounts of warm or hot
food may have been stored
recently.
• Refrigerator has recently been
disconnected for a period of time.
• Refrigerator control is set too
warm.
• Refrigerator operates at higher
pressures during the start of the
ON cycle.
• Floor is uneven or weak. The
refrigerator rocks on the floor
when it is moved slightly.
• Dishes are vibrating on the
shelves in the refrigerator.
• The refrigerator is touching the
wall or cabinets.
• Refrigerator is not connected to a
water supply.
• The refrigerator is moved while
the compressor is operating.
• The weather is hot and humid
which increases the rate of frost
buildup and internal sweating.
• Door is slightly open.
• Door is opened too often or for
too long.
• Adjust the refrigerator to a warmer setting.
• Adjust the freezer or refrigerator control to a colder setting
until the freezer or refrigerator temperature is satisfactory.
• Warm air enters the refrigerator/freezer whenever the door
is opened. Open the door less often.
• Cancel the Display mode. (See the page 23).
• Close the door completely.
• Wait until the refrigerator or freezer has had a chance to
cool food to the set temperature.
• It takes a few hours for the refrigerator to reach the set
temperatures.
• Adjust the refrigerator control to a colder setting.
• This is normal.
• Be sure floor is level and solid and can adequately support
the refrigerator.
• It is normal for dishes to vibrate slightly. Move dishes
slightly. Make sure refrigerator is level and firmly set on
floor.
• Move the refrigerator so that it does not touch the wall.
• Connect to water supply or turn off the icemaker.
• This is normal and will not have an impact on the
performance or the life of the compressor. The rattling will
stop after the refrigerator comes to a rest and the
compressor stabilizes.
• This is normal.
• Close the door.
• Open the door less often.
Loading ...
Loading ...
Loading ...