Loading ...
Loading ...
Loading ...
21
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch, you must remove the
resistance handle and the right and left shields as
described below.
First, remove the
six M4 x 10mm
Screws (70)
and then gen-
tly remove the
Resistance
Handle (9).
See EXPLODED DRAWING B on page 27. Locate
the Right and Left Shields (7, 8). Remove the four
M4 x 19mm Screws (69) and the ten M4 x 16mm
Screws (68) from the Right and Left Shields. Then,
gently remove the Right and Left Shields.
Next, locate the Reed Switch (47). Turn the Left Fan
(4) until a Magnet (85) is aligned with the Reed Switch.
Then, slightly loosen the two indicated M4 x 19mm
Screws (69), slide the Reed Switch slightly closer to or
away from the Magnet, and then retighten the Screws.
Turn the Left Fan (4) so that the Magnet (85) passes
the Reed Switch (47) repeatedly. Repeat these actions
until the console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the parts that you removed.
70
70
9
4
69
85
47
Loading ...
Loading ...
Loading ...