Loading ...
Loading ...
Loading ...
7
OPERATION
The appliance should be placed where the ambient temperature is between 10~38°C (50~100°F). If the
ambient temperature is above or below this range, the performance of the unit may be affected. Placing your
unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
Connect power cord to a properly grounded outlet.
This appliance is equipped with Memory IC should there be a power interruption, unit will auto recover at
last setting.
Control Panel:
ON/OFF Power
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.
Setting the temperature Control
Adjustable temperature: 1°C to 10°C (34°F to 50°F)
Set the desired cooling temperature by pressing the corresponding button or . Each depression of
the buttons will raise or lower the temperature setting by 1 degree. The temperature selected will flash in the
LED display for approximately 5 seconds, then revert back to displaying the temperature of the cabinet interior.
°C/°F
This unit has the option of displaying temperatures in either Celsius or Fahrenheit. To change the setting, press
the °C/°F button.
NOTE:
If the unit is unplugged, turned off or experienced a power failure, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
When you use the appliance for the first time, or restart after having been shut off for a long time, there could
be a few degrees variance between the set temperature and the displayed temperature on the LED readout.
This is normal and is due to the length of inactivity. Once the unit runs for a few hours, everything will be back
to normal.
Loading ...
Loading ...
Loading ...