Loading ...
Loading ...
Loading ...
Extra Dry
100min
30min
60min
30min
A - Program control knob
D - Start/Pause button
F - Indicator light
E - Program setting
Heat Dry
Extra dry*
Normal**
6
A DE
Sensor Program
The drying time will depend on the type of fabric.
The maximum time is 4 hours. Choose the program
according to the type of fabric.
Timed Program
100 min 100 minute timed drying cycle, choose the program
according to the type and weight of the fabric.
60 min 60 minute timed drying cycle, choose the program
according to the type and weight of the fabric.
30 min 30 minute timed drying cycle, choose the program
according to the type and weight of the fabric.
The dryer will automatically switch off the heater at the end of every heat drying cycle
and start a cool down phase. This is important as it removes the stored heat from the
laundry and helps prevent creasing.
Air dry
60 min 60 minute timed cool air cycle, no heat applied.
30 min 30 minute timed cool air cycle, no heat applied.
*) AS/NZS 2442.2 test program setting.
**) EN61121 test program setting.
B - Delay button
You may choose to start the dryer after a preset time. The delay range is between
0.5 and 24 hours. Gently touch the delay button before a program starts, each touch
will add one hour. When in excess of 24 hours, the remaining time will be re-displayed.
After a delay time is set, touch the Start/Pause button to start the delay operation
and the indicator light will flash.
C - LED screen
This screen displays the remaining time for a program and the delay time.
B
C
F
F
After turning on the power, select the drying program you desire.
Gently touch Start/Pause button to start the dryer. To Pause a program gently touch
this button during the operation of the dryer. The display screen will flash and the
machine will be halted.Press the Start/Pause button again and the program will
continue to operate.
Loading ...
Loading ...
Loading ...