Loading ...
Loading ...
Loading ...
Extra Dry
100min
30min
60min
30min
INSTALLATION INSTRUCTIONS
9
Tools required
For plaster/ Drill & 3mm Bit
1
Wooden wall Philips head screwdriver
1
Wall mounting kit includes
Plastic spacers 2
Wall hanging brackets 2
Hanging hook 2
Wood screws, 12gx50mm 4
Screws for hanging hooks 6
and plastic spacers.
Description
Free standing
The dryer stands on the floor and can easily be moved into position. Ensure
that it is placed on a level floor. Also ensure there is at least 50 mm air
clearance between the back of the dryer and the wall to allow fresh air flow
for efficient operation.
Attention:
Please don’t put a heavy
load on the dryer’s top panel,
such as a basket full of
wet laundry
Inverted wall mounting
The dryer can be mounted on the wall in the inverted position only by following
these instructions.
Invert the dryer so that the control panel is at the bottom (see figure 4) this
allows easier access to the controls.
1. Determine the location of the dryer on the wall and mark the bracket
position.
A minimum 50 mm is needed between the top of the dryer and the ceiling
for ease of installation;
If mounting above a washing machine, allow sufficient room to open the lid
of the washer.
Minimum lid
clearance
Extra Dry
100min
30min
60min
30min
Loading ...
Loading ...
Loading ...