Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
87
Seats, rear
The rear seat backrest and the outer seat head
restraints can be folded. The centre seat head
restraint can be adjusted to suit the height of the
passenger.
Head restraint, centre seat, rear
Adjust the head restraint according to passenger
height so that the whole of the back of the head
is covered if possible. Slide it up as required.
To lower the head restraint again, the button
(located in the centre between the backrest and
head restraint, see illustration) must be pressed
in while the head restraint is pressed down care-
fully.
WARNING
The centre seat head restraint must be in its
lowest position when the centre seat is not
used. When the centre seat is used, the head
restraint must be correctly adjusted to the
height of the passenger so that it covers the
whole of the back of the head if possible.
Manual lowering of the outer head
restraints, rear seat
Pull the locking handle closest to the head
restraint to fold the head restraint forward.
The head restraint is moved back manually until a
"click" can be heard.
WARNING
The head restraint must be in locked position
after being folded up.
Lowering the rear seat backrest
IMPORTANT
There must be no objects on the rear seat
when the backrest is to be folded down. The
seat belts must not be connected either. Oth-
erwise there is a risk of damaging the rear
seat upholstery.
The triple-section backrest can be folded in dif-
ferent ways.
NOTE
The front seats may need to be pushed for-
wards, and/or the backrests adjusted
upwards, in order that the rear backrests can
be fully folded forward.
•
The left-hand section can be folded sepa-
rately.
•
The centre section can be folded separately.
•
The right-hand section can only be folded
together with the centre section.
Loading ...
Loading ...
Loading ...