Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
* Option/accessory.
266
Starting the engine
The engine is started and switched off using the
remote control key and the START/STOP
ENGINE button.
Ignition switch with remote control key extracted/
inserted. and START/STOP ENGINE button.
IMPORTANT
Do not press in the remote control key incor-
rectly turned - hold the end with the detacha-
ble key blade, see Detachable key blade -
detaching/attaching (p. 169).
1. Insert the remote control key in the ignition
switch and press it in to its end position.
2.
Depress the brake pedal fully
1
.
3.
Press the START/STOP ENGINE button
and then release it.
When the engine is started the starter motor
works until the engine is started or until its over-
heating protection triggers.
When starting the engine in normal conditions
the car's electric drive motor is prioritised - the
diesel engine remains switched off. This means
that after pressing the START/STOP ENGINE
button the electric motor has "started" and the
car is ready to drive. A started motor is indicated
by the combined instrument panel's indicator
lamps extinguishing and its preset theme illumi-
nating (see Digital combined instrument panel -
overview (p. 69)).
However, there are situations where the diesel
engine is started instead, e.g. in the event of the
temperature being too low or if the hybrid battery
needs charging.
IMPORTANT
If the engine fails to start after 3 attempts -
wait for 3 minutes before making a further
attempt. Starting capacity increases if the bat-
tery is allowed to recover.
WARNING
Never remove the remote control key from the
ignition switch after starting the engine or
when the car is being towed.
WARNING
Always remove the remote control key from
the ignition switch when leaving the car, and
make sure that the key position is 0 - in par-
ticular if there are children in the car. For
information on how this works - see Key posi-
tions (p. 82).
NOTE
The idling speed can be noticeably higher
than normal for certain engine types during
cold starting. This is done in order that the
emissions system can reach normal operating
temperature as quickly as possible, which
minimises exhaust emissions and protects the
environment.
Keyless starting (Keyless drive)*
Follow steps 2-3 for keyless (p. 173) starting of
the engine.
1
If the car is moving then it is enough to press the START/STOP ENGINE button to start the engine.
Loading ...
Loading ...
Loading ...