Loading ...
Loading ...
Loading ...
12
Recall Function
After switching off the hob ( ), it is possible to recall the last settings.
cooking stages of all cooking zones (power)
minutes and seconds of programmed cooking zone-related timers
Heat up function
The recall procedure is following:
Press the key [ ]
Then press the key [ II ] within 6 seconds
The precedent settings are activated.
Bridge Function
This function allows to use the 2 cooking zones at the left at same time with the same features as a
single cooking zone. Booster function isn’t allowed.
Action Control panel Display
Activate the hob Press display [ ] [ 0 ] or [ H ] on the
4 displays
Activate the bridge Press on the 2 cooking zones left [ 0 ] appears on the front
zone
[ ∏ ] on the rear zone.
Increase bridge Slide on the “SLIDER “ [ 1 to 9 ] or [ U ]
Stop the bridge Press on the 2 cooking zones links [ 0 ] or [ H ] on the 2 zones
“Keep warm” Function
This function allows to reach and maintain automatically a temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
To engage, to start the function « Keep warm » :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]
To engage Press between 0 and 1 on the“ [ U ]
“SLIDER
To stop Press between 0 and 1 selected [ U ]
Slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
This function can be started independently on all the heating zones.
When the pan leaves the cooking zone of the "Keep warm" function remains active during
approximately 10 minutes.
The maximum duration of keeping warm is 2 hours.
Loading ...
Loading ...
Loading ...