Loading ...
Loading ...
3 / 4
1x
green
3x
red
Conirm that the code(s) added in previous step can unlock the door.
One green lash with one beep Three red lashes with three beeps
or
Make sure the door is open. Press
the Program button once.
Locking the Door Unlocking the Door
Enter user code. A total of 16 user
codes may be programmed.
Press Lock button once.
A B C
What lights and sounds does the lock produce?
D
Each user code
must be a unique
code between 4
and 8 digits.
Programming was successful. Programming was unsuccessful.
Make sure not to pause for more than 5 seconds during programming.
Make sure the user code is not a duplicate and that it is between 4 and 8 digits
during your next attempt. Make sure the lock has room for an additional code. If
all user code positions are illed, delete a code to make room for this one.
Press Lock button once. Enter user code.
*Beeping sound will only be heard if switch #3 (on the lock interior) is in the on positon. See “Switches and Status LED Colors” on page 4.
Programming Timeout
During programming, if no button is pressed for ive seconds, the system will time out (indicated by
three beeps and a red lashing keypad), and you will need to restart the procedure.
Mastercode
For enhanced security, a mastercode may be used when adding and deleting user codes. For more information about the mastercode,
download the Programming and Troubleshooting Guide on the SmartCode 913 page at www.kwikset.com.
Re-key the lock (if needed). Install the battery cover.
A B
IMPORTANT:
Remove battery
pack before
re-keying.
actual
size
M
V (3x)
V
K
H
K
a a
b b
c
Re-key the lock
to work with your
existing key. See
the supplied
SmartKey Re-key
instructions for
more information.
Reinstall
battery
pack.
7
8
6
Add user codes (16 max)
Re-key the lock (if needed) and install the battery cover
Test the lock (review normal operation)
Loading ...