Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
7
NS-RTM10BK0/NS-RTM10WH0/NS-RTM10SS0
Interior
Setting up your refrigerator
Before using your refrigerator
• Remove the exterior and interior packaging.
• Wash the inside with a damp, warm cloth and a baking soda solution (two tablespoons in a quart of water), then wipe
dry with a dry cloth. Do this periodically to keep your refrigerator looking new.
• Level your refrigerator using the leveling feet. If you do not level your refrigerator, the door may not close or seal
correctly, causing cooling, frost, and moisture problems. Turn the leveling feet clockwise to raise or counterclockwise to
lower a side.
Finding a suitable location
• Place your refrigerator on a floor that is strong enough to support it when fully loaded.
• Do not install your refrigerator on carpeting or a rug.
• Your refrigerator is designed to be free standing and should not be recessed or built-in.
• Do not install your refrigerator in a garage or any other outside installation.
• Adjust the feet to keep your refrigerator level.
• If you locate your refrigerator next to a fixed wall, allow sufficient space on the hinge side for the door to swing open.
• Position your refrigerator away from direct sunlight and sources of heat, such as a stove, heater, or radiator. Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extremely cold
temperatures may also prevent your refrigerator from performing correctly.
• Avoid locating your refrigerator in moist areas.
Your refrigerator is designed to operate in a temperature range of 50°F (10°C) and 109°F (43°C). If you operate your
refrigerator outside this temperature range, your refrigerator may not work correctly.
Crisper
Bottle storage bin
Freezer shelf
Freezer temperature control
Refrigerator temperature control
Refrigerator shelves
Glass crisper cover
Freezer door racks
Dairy compartment
Refrigerator door racks
LED light
Loading ...
Loading ...
Loading ...