Loading ...
Loading ...
Loading ...
uuJump Startingu
644
Handling the Unexpected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle’s 12-volt battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■
What to Do After the Engine Starts
1What to Do After the Engine Starts
The Vehicle Stability Assist
TM
(VSA®) system, Vehicle
Stability Assist
TM
(VSA®) OFF, Adaptive Cruise Control
(ACC) with Low Speed Follow, safety support, and
low tire pressure/TPMS indicators may come on in
amber along with a message in the driver information
interface when you set the power mode to ON after
re-connecting a 12-volt battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
20 ACCORD HYBRID-31TWA6200.book 644 ページ ２０１９年７月２３日 火曜日 午後３時１４分
Loading ...
Loading ...
Loading ...