Loading ...
Loading ...
Loading ...
47
READY TO GO
3
Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016
Gearbox and steering wheel
Moving off
- To start the engine, the gear
selector must be in position N.
- Press rmly on the brake pedal.
- Operate the starter.
- When the engine is running, place
the gear selector on R, A or M as
desired.
- Release the brake pedal and
accelerate.
If the gear selector is not in position N,
and/or if the brake pedal is not pressed,
the engine will not start. Repeat the
above procedure.
Reverse gear
Engaging reverse gear
Move the gear selector to R.
Only attempt to select reverse gear
when the vehicle is stationary.
Neutral
Changing to neutral
Move the gear selector to N. If the
vehicle is moving, do not select this
position even momentarily.
6-SPEED ELECTRONIC GEARBOX
- automatic mode: gear selector in
position A.
- manual mode: gear selector in
position M.
For safety:
It is only possible to come out
of position N if the brake pedal is
pressed.
The change from position A (driving in
automatic mode) to position M (driving
in manual mode) or vice versa can be
made at any time. The warning lamp A
goes off in the instrument panel.
Mode selection
Loading ...
Loading ...
Loading ...