Loading ...
Loading ...
Loading ...
151
QUICK HELP
8
Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016
Changing a bulb
Open the bonnet. To access the bulbs,
reach behind the headlamp unit.
Carry out the operations in reverse
order to ret each bulb and check that
the bonnet is closed securely.
Halogen bulbs must be changed
with the headlamp off. Wait a few
minutes (risk of serious burns).
Do not touch the bulb directly with your
ngers, use lint-free cloths.
It is normal for condensation to form
inside the headlamps. Regular use of
the vehicle eliminates this misting.
The bulbs must be changed with
the ignition off or with the battery
disconnected. Wait approximately
3 minutes after changing the bulb
before reconnecting the battery.
Check that the lamps operate correctly
after each operation.
High pressure washing
When using this type of washing
on stubborn dirt, do not persist
on the headlamps, the lamps and
their edges to avoid damaging their
coating and seals.
2. Sidelamps
Type A, W5W - 5W
- Remove the cover by pulling the
exible rubber tab.
- Remove the bulb holder tted by
pressure by pulling the connector.
- Change the bulb.
- Ensure that the cover is retted
correctly all round to assure correct
sealing.
Front lamps
1. Dipped / Main beam headlamps
Type C, H4 - 55W
- Remove the centre cover by pulling
the exible rubber tab.
- Disconnect the electrical connector.
- Release the retaining tab.
- Change the bulb taking care
to align the metal part with the
grooves on the lamp.
- Reposition the retaining tab.
- Ensure that the cover is retted
correctly all round to assure correct
sealing.
Loading ...
Loading ...
Loading ...