Owner's Manual - Page 146

For X-H1.

Loading ...
Loading ...
Loading ...
128
6
The Shooting Menus
FLICKER REDUCTION
Select ON to reduce  icker in pictures and the display when shoot-
ing under  uorescent lighting and other similar light sources.
Options
Options
ON OFF
O
Enabling  icker reduction disables the electronic shutter and increases
the time needed to record pictures.
ISO AUTO SETTING
Choose the base sensitivity, maximum sensitivity, and minimum
shutter speed for the A position on the sensitivity dial. Settings
for AUTO1, AUTO2, and AUTO3 can be stored separately; the de-
faults are shown below.
Item
Item
Options
Options
Default
Default
AUTO1
AUTO1
AUTO2
AUTO2
AUTO3
AUTO3
DEFAULT SENSITIVITY 12800–200 200
MAX. SENSITIVITY 12800–400 800 1600 3200
MIN. SHUTTER SPEED ⁄–¼ SEC, AUTO AUTO
The camera automatically chooses a sensitivity between the de-
fault and maximum values; sensitivity is only raised above the
default value if the shutter speed required for optimal exposure
would be slower than the value selected for MIN. SHUTTER SPEED.
N
If the value selected for DEFAULT SENSITIVITY is higher than that se-
lected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to
the value selected for MAX. SENSITIVITY.
The camera may select shutter speeds slower than MIN. SHUTTER SPEED
if pictures would still be underexposed at the value selected for MAX.
SENSITIVITY. If AUTO is selected for MIN. SHUTTER SPEED, the camera
will automatically choose a minimum shutter speed approximately equal
to the inverse of the lens focal length, in seconds (for example, if the lens
has a focal length of 50mm, the camera will choose a minimum shutter
speed in the neighborhood of ⁄s). The minimum shutter speed is not
a ected by the option selected for image stabilization.
Loading ...
Loading ...
Loading ...