Loading ...
Loading ...
Loading ...
13
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the door is closed
completely or it will not lock and the cycle will not begin.
1. Press DELAY.
“DELAY” will flash, and “00:00” will appear in the display.
2. Press MORE or LESS to enter the amount of time you want to
delay the cycle. Delay time can be set from 10 minutes
(00:10) to 11 hours and 59 minutes (11:59).
3. While “DELAY” is flashing, press the CLEAN pad. “CLEAN”
will flash in the display.
4. Press MORE or LESS.
CL-M (Clean - Medium soil, 3 hours) appears in the display.
5. To choose a clean setting other then Medium, press MORE or
LESS to scroll through the Self-Cleaning settings.
CL-H (Clean - Heavy soil, 4 hours)
CL-M (Clean - Medium soil, 3 hours)
CL-L (Clean - Light soil, 2 hours)
Choosing a cleaning level automatically programs the Self-
Cleaning time.
After 4 seconds, “CLEAN,” “DELAY” and “LOCK” will appear
in the display to show that the oven is set for a delayed clean
operation. The delay time is displayed.
To change the delay self-clean time:
1. Press DELAY.
“DELAY” flashes, and “00:00” will appear in the display.
2. Press MORE or LESS to enter the amount of time you want to
delay the cycle.
After 4 seconds, “CLEAN,” “DELAY,” and “LOCK” will appear
in the display to show that the oven is set for a delayed clean
operation. The delay time is displayed.
When the self-clean cycle starts:
“DELAY” will turn off, and the clean time will appear in the
display.
To Stop Self-Clean Anytime:
Press CANCEL. All words disappear from the display. All
functions are canceled. The time of day appears in the display.
Depending on the actual oven temperature when Self-Clean is
canceled, the oven door may remain locked until the oven cools.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may
affect the finish.
Cleaning Method:
■ Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
■ affresh™ Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See “Assistance or Service” section to order.
STAINLESS STEEL (on some models)
To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-
wool pads, gritty washcloths or abrasive paper towels.
Cleaning Method:
Rub in direction of grain to avoid damaging.
■ affresh™ Stainless Steel Cleaner Part Number W10355016
(not included):
■ See “Assistance or Service” section to order.
■ Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
CERAMIC GLASS (on some models)
To avoid damage to the cooktop, do not use steel wool, abrasive
powder cleansers, chlorine bleach, rust remover or ammonia.
Cleaning Method:
Always wipe with a clean, wet cloth or sponge and dry thoroughly
to avoid streaking and staining.
affresh™ Cooktop Cleaner Part Number W10355051 is
recommended regularly to help avoid scratches, pitting and
abrasions and to condition the cooktop, and can be ordered as
an accessory. See “Assistance or Service” section to order.
Cooktop Scraper Part Number WA906B is also recommended for
stubborn soils, and can be ordered as an accessory. See
“Assistance or Service” section to order. The Cooktop Scraper
uses razor blades. Store razor blades out of the reach of children.
Light to moderate soil
■ Paper towels or clean damp sponge
Sugary spills (jellies, candy, syrup)
■ Cooktop Scraper:
Scrape off sugary spills while the cooktop is still warm. You
may want to wear oven mitts while cleaning the cooktop.
■ Cooktop Protectant and clean damp paper towel: Clean as
soon as cooktop has cooled down. Rub creme into surface
with a damp paper towel or soft cloth. Continue rubbing until
white film disappears.
Loading ...
Loading ...
Loading ...