Loading ...
Loading ...
Loading ...
17
En
Adjusting the Sound Quality
By pressing BASS, TREBLE, etc. on the
remote controller during play, you can
adjust frequently used settings, such as the
sound quality.
0 BALANCE adjustments can only be
made with the buttons on the main unit.
∫ BASS (a)
Enhance or moderate the bass range of the
speakers.
Select between j5 and i5 in 1 dB
increments. (default value: 0)
0 It cannot be set if the DIRECT mode is
selected.
∫ TREBLE (b)
Enhance or moderate the treble range of
the speakers.
Select between j5 and i5 in 1 dB
increments. (default value: 0)
0 It cannot be set if the DIRECT mode is
selected.
∫ DIRECT (c)
Switch to the DIRECT mode which outputs
pure sound as it was intended by
bypassing the tone control circuits during
play.
∫ TONE (d)
Switch to the TONE mode which enables
BASS and TREBLE.
∫ P.BASS
P.BASS is enabled which emphasizes the
bass. Repeatedly press TONE (d) to
display "P.BASS", then press the Left/Right
cursors to switch On or Off. (Default value:
Off)
∫ BALANCE (main unit only)
Adjust the balance of the sounds output
from the left and right speakers.
Select between Li10 and Ri10 in 1 steps
increments. (default value: 0)
> Before Start > Part Names > Install > Playback
Setup | Others
c
d
a
b
SN29403247_SX-10AE_En_1707XX.book 17 ページ ２０１７年７月１９日 水曜日 午後１時５９分
Loading ...
Loading ...
Loading ...