Loading ...
Loading ...
Loading ...
OPERATION
RadiantCooktopCooking(cont.)
• *. e_ #A
The right front element has two
cooking zones:
6"Zone
To use the dual cooking zones:
Touse the small 6' zone, push in and
turn the cooktop control knob in the
counter-c_ockwise direction to your
desired setting.
Touse the large 9" zone, push in and
turn the cooktop control knob in the
clockwise direction to your desired
setting.
The surface unit on the left side of
your cooktop is designed to let you
heat all parts of a large utensil that is
too large to fit on one surface unit.
The Bridge Surface Unit is made up
of afront section, a middle section,
and a rear section. You can heat all
sections at once, or the front and rear
section separately when cooking with
normaI-size utensils.
To use the bridge surface unit:
Push in and turn
the left front
surface unit
control knob in the
clockwise direction
to your desired
setting. This will
allow you to heat the front and middle
sections of the Bridge Surface Unit.
To use only the []_-._
left front surface
unit without the
middle section,
push in and turn
the left front
surface unit
control knob in the counter-clockwise
direction to your desired setting.
Use the left rear control knob to
heat the rear section of the Bridge
Surface Unit.
1. Be sure the canner is centered
over the zones.
2. Make sure the canner is flat on
the bottom.
3. Use recipes and procedures
from reputable sources. These
are available from manufacturers
such as Ball®and Kerre, and the
Department of Agriculture
Extension Service.
4. Use caution, while canning, to
prevent burns from steam or heat.
9
20P2562 ENv01
Loading ...
Loading ...
Loading ...