Loading ...
Loading ...
Loading ...
CAUTION:Before replacing
your oven light bulb, turn the oven light off
and disconnect the electrical power to the
range at the main fuse or circuit breaker
panel.
Be sure to let the light cover and bulb cool
completely.
To remove the cover:
Hold a hand under the cover so it doesn’t
fall when released. With fingers of the
same hand, firmly push back the wire
cover holder. Lift off the cover.
Do not remove any screws to remove
the cover.
Replace bulb with a 40-watt household
appliance bulb.
To replace the cover:
Place it into groove of the light
receptacle. Pull wire forward to the
center of the cover until it snaps
into place.
Connect electrical power to the range.
GEAppliances.com
27
Do not clean the bake element or the broil
element. Any soil will burn off when the
elements are heated.
To clean the oven floor, gently lift the bake
element. Clean with warm soapy water.
Clean the oven racks with an abrasive
cleanser or scouring pad. After cleaning,
rinse the racks with clean water and dry with
a clean cloth.
NOTE: Take the racks out of the oven before
you begin the self-clean cycle or they may
discolor.
To make the racks slide more easily, apply a
small amount of vegetable oil or cooking oil
to a paper towel and wipe the edges of the
oven racks with the paper towel.
Wire cover holder
Oven Heating Elements
Oven Racks
Oven Light Replacement (on some models)
Safety Instructions Operating Instructions
Safety Instructions Operating Instructions Care and Cleaning
Troubleshooting Tips
Consumer Support
Loading ...
Loading ...
Loading ...