Loading ...
Loading ...
Loading ...
15
Problem Possible Solution
My vacuum will not turn ON 1. Always be sure to plug it in rmly.
2. The Thermal Protector may have been activated - unplug your vacuum and let cool for 30 minutes. If this does not work, there may be no voltage in the
wall plug.
3. Check the fuse or breaker in your home. If there is a blown fuse or tripped breaker, replace the fuse in your home or reset the breaker.
My vacuum is hard to push 1. Open the Suction Control Valve near the handle by twisting the valve clockwise.
My vacuum is losing suction
WARNING
To reduce the risk of personal injury, unplug before cleaning or servicing.
1. Be sure to empty the dirt cup if it is full.
2. You may have a clogged lter. Refer to the Maintenance in the user manual for directions on removing clogs.
3. Your lter may be dirty. Your lter should be rinsed every 4-6 uses. Refer to the Maintenance section for directions on how to
clean your lters.
4. If problem persists, you may have a clog in the system. Refer to the Maintenance section on how to remove a clog in your system.
My brush roll is not spinning
CAUTION
To reduce the risk of injury from moving parts, unplug before cleaning or servicing.
1. Unplug and remove any hair or other blockages around the brush roll.
2. Clean lters. Refer to the Maintenance section for directions on how to clean lters.
3. Check for clogs in the system. Refer to the Maintenance section for directions on how to remove clogs.
4. Resume normal operation.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.
For more troubleshooting or FAQ’s please visit Hoover.com or Hoover.ca
Troubleshooting
Loading ...
Loading ...
Loading ...