Loading ...
Loading ...
Loading ...
13
Maintenance
Cleaning & Maintaining the Brush Roll
To access the brush roll, unscrew
the nozzle guard from the nozzle.
Remove the brush roll by
pulling it up and out from the
vacuum belt.
2
Remove any hair or
blockages.
3
Replace brush roll and nozzle
guard. Secure with screws.
4
1
TIP: Rotate brush roll manually to ensure the belt is properly installed. Vacuum is equipped with an automatic brush roll shutoff in the event of overload or jam.
Check for obstructions in the brush roll area and remove any obstructions. When obstructions are cleared, resume cleaning as normal.
LUBRICATION:
The motor and brush roll
are equipped with bearings which contain
sufī”cient lubrication for their lifetime.
The addition of lubrication could cause
damage. Do not add lubricant to motor or
brush roll.
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
Loading ...
Loading ...
Loading ...