Loading ...
Loading ...
Loading ...
English - 13
02 OPERATING
( 6 )
Ice O
(Hold 3
sec for
child lock)
If you don’t want to make more ice, touch
this button. Also, pressing and
holding this button for 3 second locks the
display panel and dispenser buttons so
the buttons can not be used. The Child
Lock icon lights up to indicate you’ve
activated the Child Lock function.
(7)
Ice Type
Touch this button to select your desired
ice type. Cubed and crushed ice modes
alternate each time you press the Ice Type
button.
Note that when you push the Ice Type
button, you turn the Water dispenser o .
(8)
Water
Touch this button to dispense water. Note
that you cannot dispense water and ice
simultaneously.
The Water dispenser turns o when you
press the Ice Type button.
Cooling
O Mode
Cooling O mode (also called Shop
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop fl oor. In Cooling O mode, the
refrigerator’s fan motor and lights work
normally, but the compressors do not run,
and the refrigerator and freezer do not
get cold.
To start Cooling O mode, Touch and
hold the Energy Saver button and the
Power Freeze button for 5 seconds during
normal operation. The refrigerator chime
sounds and the temperature display
fl ashes OF OF.
To cancel Cooling O mode, Touch and
hold the Energy Saver and the Power
Freeze buttons again for 5 seconds.
( 9 )
Ice O
When you touch the Ice O button (
),
the Ice O icon lights and the Ice Maker
stops making ice.
We recommend you stop ice making
if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and
the water line is not connected,
there will be a water valve noise
from back of the unit. Press the Ice
O (Hold 3sec for child lock) button
(
) for less than 3 seconds
until the Ice O Indicator ( )
illuminates.
If you do not press any button(letters not ICON),
the display turns o in a few seconds.
If you press any button(letters not ICON), the
display lights up again.
The function key will operate after you remove
your finger from the letters except E.Saver, Ice
and Water key.
( 10 )
Filter
Water fi lter usage
The Water Filter icon lights in red when
you need to change the water fi lter.
This occurs after you use about 300
gallons of water (which usually takes
about 6 months).
After install the new water fi lter, reset the
Water Filter icon by touching the Alarm/
Hold 3 sec for Filter Reset button for 3
seconds.
• If water is not dispensing or
dispensing slowly, you need to
replace the water filter because
the water filter is clogged.
• Some areas have large amounts
of lime in their water which
causes the water filter to clog
more quickly.
DA68-02500A-11.indb 13DA68-02500A-11.indb 13 2013. 12. 2. 9:482013. 12. 2. 9:48
Loading ...
Loading ...
Loading ...