Loading ...
Loading ...
Loading ...
20 / EN
Induction Hob / User Manual
7 What to do in case of a problem
The hob or the cooking zone doesn’t start-up:
The hob is badly connected on the electrical
network.
The protection fuse cut-off.
The looking function is activated.
The sensitive keys are covered of grease or
water.
An object is put on a key.
The control panel displays [ U ]:
There is no pan on the cooking zone.
The pan is not compatible with induction.
The bottom diameter of the pan is too small.
The control panel displays [ E ]:
The electronic system is defective.
Disconnect and replug the hob.
Call after sales
One or all cooking zone cut-off:
The safety system functioned.
You forgot to cut-off the cooking zone for a long
time.
One or more sensitive keys are covered.
The pan is empty and its bottom overheated.
The hob also has an automatic reduction of
Booster level and breaking Automatic overheat-
ing
Continuous ventilation after cutting off the
hob:
This is not a failure, the fan continuous to pro-
tect the electronic device.
The fan cooling stops automatically.
The automatic cooking system doesn’t start-
up:
The cooking zone is still hot [ H ].
The highest Booster level is set [ 9 ].
The control panel displays [ ]:
Refer to the chapter “Keep warm“.
The control panel displays [ II ]:
Refer to the chapter “Stop&Go“
The control panel displays [ ] or [ Er03 ] :
An object or liquid covers the control keys. The
symbol disappear as soon as the key is released
or cleaned.
The control panel displays [ E2 ] :
The hob is overheated, let it cool and then turn
it on again.
The control panel displays [ E8 ] :
The air inlet of the ventilator is obstructed, re-
lease it.
The control panel displays [ U400 ] :
The hob is not connected to the network. Check
the connection and reconnect the hob.
The control panel displays [ Er47 ] :
The hob is not connected to the network. Check
the connection and reconnect the hob.
If one of the symbols above persists, call the after
sales service.
Loading ...
Loading ...
Loading ...