Loading ...
Loading ...
Loading ...
29
EN
Water Dispenser Tank (Non
plumbed models only)
The water tank holds the water in which is to be
dispensed or used by the automatic ice maker to
make ice. Do not fill this tank with any other liquid
other than water. Doing so can damage the water
dispensing system.
1
Remove the water dispenser tank by pulling it
out while holding the handle.
2
Open the cover or cap of the water dispenser
tank.
3
Fill with bottle filtered or clean filtered water
up to the reference line indicated inside the
water dispenser tank. (Total capacity: 4 ℓ)
4
After filling with water, close the cover or cap
of the water dispenser tank.
5
Refit the water dispenser tank on the fridge
shelf.
WARNING
• Children should not be allowed near the
dispenser tank.
• Do not fill the water tank with drinks other than
water or fill with hot water.
• Fill with potable water only into icemaker or
dispenser water tank.
CAUTION
• Do not apply excessive force or impact when
removing or assembling the water dispenser
tank. Doing so can cause appliance damage or
injury.
NOTE
• Before using the water dispenser tank after
installing the appliance, it should be washed
before filling it with water.
• Check if the water dispenser tank has been
placed on the appliance correctly. If it is not
assembled correctly, water may leak from the
tank into the appliance.
• If there is an insufficient amount of water in the
water dispenser tank, ice cube size and quantity
may be affected and may result in no ice being
made.
Loading ...
Loading ...
Loading ...