Loading ...
Loading ...
Loading ...
22
NS-AC14PWH8
www.insigniaproducts.com
Using the air conditioner
You can control your air conditioner by using the control panel on the
front of the unit, or by using the remote control. If using the remote
control, always point it at the air conditioner.
Button Description
POWER
Press to turn your air conditioner on or off.
When you turn the air conditioner on, you will hear a tone and the air discharge automatically opens. The
display shows the set temperature and the current mode.
When you turn your air conditioner off, you will hear a tone and the air discharge closes. Control settings, such
as Mode, Set Temperature, Auto Swing, and so on, are retained in memory when the power is off (unless the
unit has been unplugged).
MODE
Press to cycle through the operating modes (COOL, FAN, DRY, or ENERGY SAVER). The LED display shows the
active mode. The default mode is COOL.
COOL–The compressor runs and cools the room. Use the
or
and buttons to set the desired
temperature and fan speed.
FAN–The fan circulates the air, but the compressor does not run to cool it. Use the button to set the desired
fan speed.
DRY–The fan and dehumidifier both run to remove humidity from the air. After the set temperature is reached,
the compressor and fan turn off. The fan speed is preset and cannot be adjusted. (We suggest that you use a
drain hose in dry mode. See “Attaching the drain hose for DRY mode operation (optional)” on page 19.)
ENERGY SAVER– When the energy saver is active, ENERGY SAVER appears on the display. Your air conditioner
will run in cool mode at low speed.
FAN
Cycles through the available fan speeds (F1-Low, F2-Medium, F3-High). The LED next to the button
displays the fan speed. The speed can be selected in either the COOL or FAN modes.
COOL and DRY modes–press to adjust the temperature setting up to 86°F (30°C) or down to 60°F (16°C), in one
degree increments. The temperature can be switched between Fahrenheit and Celsius by pressing
and
at the same time, or by pressing the °F--°C button on the remote control.
TIMER mode–press
or
to adjust the delay time from one to 24 hours, in one hour increments. If you
press and hold
or
, the set temperature or time changes automatically.
NOTE: The temperature displayed is the room temperature, not the set temperature. In COOL, DRY, or ENERGY
SAVER mode, the thermostat in the air conditioner runs the compressor until the set temperature is reached,
then the compressor cycles on and off to maintain the set temperature.
\
TIMER
Press to set your air conditioner to turn off or turn on after a delay of up to 24 hours. The default is 0.
Automatic off–press
or
while the air conditioner is running to set the delay time from one to 24 hours,
in one hour increments. The air conditioner automatically turns off when the set delay time is reached.
Automatic on–press
or
while the air conditioner is off to set the delay time from one to 24 hours, in
one hour increments. The air conditioner automatically turns on when the set delay time is reached.
Press the TIMER button to see the delay time you have set on the LED display.
To change the set delay time (on or off), press the TIMER button, then adjust the time with the
or
buttons when the number begins to blink.
To cancel the Timer function, press the TIMER button, then press the
or
buttons when the number
begins to blink to adjust the time to 0. You can also press the TIMER button, then press it again when the
number begins to blink.
NOTE: Do not unplug the air conditioner while using the Timer function. After setting the Timer function, if
you use the remote control to change to another mode without resetting the Timer function, the timer is reset.
NS-AC14PWH8_16-0836_MAN_V1_ENG.fm Page 22 Wednesday, March 8, 2017 1:12 PM
Loading ...
Loading ...
Loading ...