Loading ...
Loading ...
Loading ...
10
6. Add liquid fabric softener
or Oxi to dispenser
Pour a measured amount of liquid fabric
softener or Oxi-type boosters, into tray; always
follow manufacturer’s directions for correct
amount of fabric softener or Oxi based on your load size.
Close dispenser drawer, then select Oxi option. Oxi is added
during main wash and Fabric Softener is added during rinse.
IMPORTANT: Oxi option must be selected to ensure proper
distribution at correct time in cycle. Do not overfill or dilute.
Overfilling dispenser will cause fabric softener to immediately
dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed into the last rinse.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
Liquid
Chlorine Bleach
5. Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 1 cup (236 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Fabric softener tray
Add a measured amount of HE liquid detergent
into detergent tray. This tray holds 3 oz. (89 mL).
If adding powder HE detergent remove inside tray. Do not overfill
tray – adding too much detergent may cause detergent to be
dispensed into the washer too early.
NOTE: Make sure tray is in drawer when using liquid detergent
and removed when using powder detergent. Do not go over the
Max line.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked “HE” or “High Efficiency.” Low-water washing
creates excessive sudsing with a non-HE detergent. Using non-
HE detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component malfunction
and, over time, buildup of mold or mildew. HE detergents should
be low-sudsing and quick-dispersing to produce the right
amount of suds for the best performance. They should hold soil
in suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efficiency are identical in formulation
and their ability to reduce suds. For example, natural, organic,
or homemade HE detergents may generate a high level of suds.
If you use one of these and see an “F0E2” error code appear
in the display, consider using a different HE detergent. Always
follow the detergent manufacturer’s instructions to determine the
amount of detergent to use. Do not go over the Max line on the
dispenser.
HELPFUL TIP: See “Washer Maintenance” for information
recommended method of cleaning washer dispenser trays.
4. Add HE detergent
HE removable
detergent tray
NOTE: Do not add single-dose laundry packets, color-safe bleach,
or fabric softener crystals to dispensers. They will not dispense
correctly. Add to the basket prior to adding laundry.
Using Laundry Product Dispensers
Oxi tray
7. Touch POWER to turn on washer
Make sure the dispenser drawer is closed completely,
then touch POWER to turn on the washer. Other methods
of turning the washer on include opening the lid or turning
the cycle selection knob.
Loading ...
Loading ...
Loading ...