Loading ...
Loading ...
Loading ...
Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz5
Operation
SETUP the Cleaner from WET to DRY Vacuuming
Remove the foam lter.
Dry o any excess moisture
from the oat cage.
Empty the tank and dispose of any liquid which may have been picked up in wet mode.
Place the top motor
housing cover onto the
main tank and secure
into position with the
two retaining clips.
Attach the dry lter
beneath the motor housing
by pushing it on.
(This dry lter must
ALWAYS be used in dry
vacuuming mode to help
provide protection and
avoid motor damage).
Connect the vacuum
cleaner to the power
supply and switch ON
by pushing the on/o
switch “I”.
Once the dry lter has
been pushed onto the oat
cage - align the lter
retainer cap onto the base
of lter and turn clockwise
to lock into place.
NOTE: as the suction power decreases, this may indicate that the paper dust bag is full and needs replacing.
Attach the paper dust
bag to the inner side
of the hose connector
on the inside of the tank
as shown.
Push the bag on to
the hose connector.
Loading ...
Loading ...
Loading ...