Loading ...
Loading ...
Loading ...
Making landline calls
1 L
ift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press MTALKN to make the call.
R To make the call using the
speakerphone, press MZN.
3 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R While talking, you can switch between the
receiver and the speakerphone by pressing
MZN.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 MEN REDIAL
2 MbN: Select the desired entry.
3 MTALKN
Pause (for PBX/long
distance service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 49).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a MDN (Pause)
2 Dial the phone number. a MTALKN
Note:
R A 3.5 second pause is inserted each time
you press MDN (Pause) on the handset.
Answering calls
U
sing the handset
When a call is being received, the message
indicator flashes rapidly if the handset
message indicator’s “Incoming call”
setting is enabled (page 31).
1 Lift the handset and then press MTALKN
or MZN when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
2 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key (1 to 9, *, or #).
Auto talk: You can answer calls simply by
lifting the handset (page 58).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
N
(left
soft key).
Using the base unit
When a landline call is being received, the
SP-PHONE indicator (Z) flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator (Z)
flash rapidly.
Additionally, the message indicator flashes
rapidly if the base unit message indicator’s
“Incoming call” setting is enabled
(page 31).
1 Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2 Speak into the microphone.
3 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press MTALKN on the handset, then
press MZN on the base unit with the call
sharing mode on (page 59).
– If the handset is on the base unit, simply
lift it.
For assistance, please visit http://shop.panasonic.com/support
39
Making/Answering Calls
TGM43x(en)_0426_ver031.pdf 39 2016/04/26 10:55:18
Loading ...
Loading ...
Loading ...