Loading ...
Loading ...
Loading ...
Making cellular calls
I
mportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line
*1
).
R Before making calls, confirm that the
corresponding
on the handset is
d
isplayed (page 21).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
1 Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 37).
Go to step 4.
3 MbN: Select the desired cellular phone. a
MSELECTN
4 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R While talking, you can switch between the
receiver and the speakerphone by pressing
MZN.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Adjusting the receiver or
speaker volume
Handset
P
ress MjN or MkN on the side repeatedly
while talking.
R T
he available settings vary whether volume
booster is turned on or off (page 27).
R Pressing the MBOOSTN key activates the
volume booster feature. Use this key with
care. To prevent hearing damage, we
recommend that you set this product to the
lowest volume setting at which you can
hear adequately.
Base unit
P
ress MjN or MkN repeatedly while talking.
Note for handset and base unit:
R The receiver or speaker volume you set is
kept for each line (landline and cellular
lines).
Making a cellular call using the
redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 MEN REDIAL
2 MbN: Select the desired entry.
3 MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 37).
4 MbN: Select the desired cellular phone. a
MSELECTN
Erasing a number in the redial list
n When a cellular phone is paired:
1 MEN REDIAL
2 MbN: Select the desired entry. a
MMENUN
3 MbN: “Erase” a MSELECTN
4 MbN: “Yes” a MSELECTN
5 MOFFN
n When a cellular phone is not paired:
1 MEN REDIAL
2 MbN: Select the desired entry. a
MERASEN
3 MbN: “Yes” a MSELECTN a MOFFN
38
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls
TGM43x(en)_0426_ver031.pdf 38 2016/04/26 10:55:18
Loading ...
Loading ...
Loading ...