Loading ...
Loading ...
Loading ...
27
TROUBLESHOOTING
POSSIBLE PROBLEM EASY SOLUTION
Machine will not work
when switched ON
• The safety locking arm may not be correctly engaged
in the vertical operating position with the locking arm
located into the two grooves on either side of the
juicer cover.
Motor appears to stall
when juicing
• Wet pulp can build up under the juicer cover if the
juicing action is too vigorous. Try slower juicing action
by pushing the food pusher down more slowly. Follow
Disassembling and Cleaning instructions and clean the
filter bowl surround, the juice disc and the juicer cover.
• The juicer will automatically stop operating if the motor
is stalled for more than 10 seconds. Either too much food
is being processed at one time or the pieces are not small
enough. Try trimming the food or cutting into smaller
pieces of even size and processing a smaller amount per
batch. To continue juicing, reset the juicer by pressing the
ON/OFF switch on the control panel to OFF then turn the
appliance back on by pressing ON/OFF switch to ON.
• Hard fruits and vegetables will put excess strain onto the
motor if a low speed is selected. Please refer to the juicing
guide to determine the correct speed for the fruits and
vegetables selected for juicing.
Excess pulp building
up the Stainless Steel
Filter Disc
• Stop the juicing process and follow Disassembling
Instructions. Remove the juicer cover, scrape off pulp,
reassemble and begin juicing again. Try alternating (soft
and hard) vegetable and fruit varieties.
Pulp too wet and
reduced extracted
juice
• Try a slower juicing action.
• Remove juice disc and thoroughly clean mesh walls with a
cleaning brush. Rinse the juice disc under hot water. If the
fine mesh holes are blocked, soak the basket in a solution
of hot water with 10% lemon juice to unblock the holes or
wash in the dishwasher. This will remove excess fibre build
up (from fruit or vegetables) which could be inhibiting the
juice flow.
Juice leaks between
the rim of the
Juicer Cover
• Try a slower juicing speed and push the food pusher down
the feed chute more slowly.
Loading ...
Loading ...
Loading ...