Loading ...
Loading ...
Loading ...
WARNING: To reduce the risk of fire or electric shock, do not use this device with
any solid-state speed control device.
When replacing filters, be sure to reinstall both the Pre-Filter Carrier and Top Cover
as previously installed. The Pre-Filter Carrier houses the Pre-Filter. The Top Cover is
the removable lid at the top of the device which seals and supports the PECO-Filter.
Fuse Safety:
This product employs overload protection via a fuse integrated into the plug.
A blown fuse indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse by following the Fuse
Replacement Instructions on the next page and check the product. If the
replacement fuse blows, a short-circuit may be present. In that event please
contact Molekule at support@molekule.com or call us at 1-855-999-9069.
Fuse Replacement Instructions:
Grasp plug and remove from the electrical outlet.
Do not unplug by pulling on cord.
Open the fuse access cover by sliding the tab toward the plug’s prongs.
Remove fuse carefully. Push the fuse toward the prongs and pry upward
from the cord-end to free the fuse.
Close the fuse access cover by sliding the tab away from prongs.
To prevent risk of fire, replace fuse only with 5A Amp, 125 Volt fuse.
Loading ...
Loading ...
Loading ...