Loading ...
Loading ...
Loading ...
Slide the new wiper blade into the
holder until the tabs lock.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm down against
the windshield or the hatch glass.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Disconnect the blade assembly
fromthewiperarmbypushingin
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
If you are changing the rear wiper
blade, go to step 6.
Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder.
5.
6.
7.
4.2.
3.
Wiper Blades
Maintenance
211
REINFORCEMENT
BLADE
HOLDER
BLADE
LOCK TAB
０７／０４／２６ １９：０４：２５ ３１ＳＣＶ６５０ ０２１６
2008 Element
Table Of Contents
Main Menu
Loading ...
Loading ...
Loading ...