Loading ...
Loading ...
Loading ...
English 29
Operations
Operations
Control panel
10
02
09
08
11
03
04
05
06
07
01
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle.
• Rinse Hold (
): The nal rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin process.
• No Spin : The drum does not spin after the nal drain process.
• Spin Only : To run the Spin Only cycle, press Spin for 3 seconds.
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then, press
Start/Pause to start the cycle. The spinning time depends on the
selected cycle.
06 Options
Press to select an option from Intensive and Pre Wash.
Press again to deselect.
• Availability of the options depends on the cycle.
07 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
08 Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
WW90K6610QW_DC68-03676B-02_EN.indd 29 2016/6/14 15:15:50
Loading ...
Loading ...
Loading ...