Loading ...
Loading ...
Loading ...
9
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
b
2
1
1
3
1. Assemble the black spacers to the
ends of the handle tube.
2. Insert the assembled tube in
between the brackets.
3. Insert threaded rod through
brackets and handle, and tighten
with a nut on each side.
The Cooking Plate of this BBQ is designed so it can be removed for easier transportation of the appliance.
To remove the plate, you must undo the 5 thumb screws holding it to the body. Two at each side, and one at rear.
WARNING
Note: when operating the BBQ, it must be ensured that all 5 Thumbscrews holding the plate are in
place and fastened tightly.
Connect the Regulator to the gas Cylinder
WARNING
WARNING
Verify ‘Gas Type’ label & data plate attached to side of
barbecue is correct for the gas you are about to connect to.
The hose and regulator is connected to the BBQ and
leak tested at factory, you will only need to connect to the
cylinder, as explained on page 4.
1. Make sure burner valves are in the ‘Off’ position.
2. Screw regulator side to the cylinder, and hand-tighten.
WARNING
CAUTION
Note: if moving the BBQ from one place to another, never
drag the cylinder behind. Disconnect the cylinder first, move,
and re-connect once reached the new location.
WARNING
WARNING
Note: For storage and cylinder exchange, disconnect hose at
the cylinder only, do not disconnect hose from the appliance.
Once finished using the barbecue
1. Disassembly operation must be done after the barbecue
has totally cooled off.
2. Be careful when removing fat collecting cup, because
the grease in the cup may take longer to cool down.
3. When transporting the barbecue, make sure that all
parts are locked firmly to place.
WARNING
WARNING
Note: for 16540,16640 and 16740 barbecues, the plate
is made of Mild Steel, and coated with non-toxic paint to
protect it from rusting. With use, the coating may come off,
and while posing no hazard, it is recommended to keep the
plate lightly oiled while not in use, and keep the barbecue
covered, to prevent corrosion of the plate.
Loading ...
Loading ...
Loading ...