Loading ...
Loading ...
Loading ...
11PARTIAL ENCLOSURES
PARTIAL ENCLOSURES TECHNICAL INFORMATION
This appliance shall only be operated in an above ground,
open air situation with natural ventilation, without stagnant
areas, where gas leakage and products of combustion are
rapidly dispersed by wind and natural convection. Failure to
adhere to these installation instructions may cause injury
or property damage and affect your ability to make a claim
under the manufacturer’s warranty. Any enclosure in which
the appliance is used shall comply with one of the following:
Within a partial enclosure that includes an overhead cover
and no more than two walls.
Any enclosure with walls on all sides, but at least one
permanent opening at ground level, and no overhead cover.
Within a partial enclosure that includes an overhead cover
and more than two walls, the following shall apply:
• At least 25% of the total wall area is completely open;
and
• At least 30% of the remaining wall area is open and
unrestricted.
In the case of balconies, at least 20% of the total of the side,
back and front wall areas shall be and remain open and
unrestricted.
WARNING
WARNING
Note: Do not modify this appliance. Any deviation from
factory settings could result in a safety hazard.
Barbecue manifold inlet thread is 3/8 SAE male flare fitting.
Operation Gas Pressure: LPG – 2.75 Kpa; NG – 1.0 Kpa
Energy Input: 18Mj per Burner.
Gas Nozzle orifice size: LPG – Ø1.2mm; NG – Ø1.95mm
APPLIANCE LENGTH
[MM ]
HEIGHT
[MM]
DEPTH
[MM]
WEIGHT
[KG]
4 Burner
ClubMan
16440,
16540,
16640,
16740
920 830 520 67
Loading ...
Loading ...
Loading ...