Loading ...
Loading ...
Loading ...
12 13
PROGRAM SCHEDULE OVERRIDES (TEMPORARY, PERMANENT, AWAY, HEAT BLAST)
OPERATION & PROGRAMMING
Away Heat Blast
®
The Away feature, if enabled, allows the thermostat to
be set to a predefined setpoint(s) by simply pressing the
Away button in your App. By default the cooling setpoint
is 85°F (29.5°C), the default heating setpoint is 62°F
(16.5°C) and the default clean air/fan mode is Auto. The
default settings can be modified in the App.
To cancel Away at the thermostat press
.
The Heat Blast
®
feature will raise the current room
temperature by 3°F to 5°F based on the installer set-up,
and then resume normal operation. To activate a Heat
Blast, press the Heat Blast button in the App.
Note: Heat Blast can only be activated in the App,
and is only available in the App if it is enabled in
the Installer Setup and the thermostat is in Heat or
Emergency Heat mode.
To cancel Heat Blast at the thermostat press
, or
the
or buttons.
ACCESSING WI-FI SETTINGS MENU
WI-FI MAINTENANCE AND TROUBLESHOOTING
The following instructions show how to enter the Wi-Fi
Setting menu and change settings. The table below lists
the settings and their detail. Default settings are shown
in bold.
How to enter the Wi-Fi settings menu to change
settings.
Press and hold
and for three seconds.
The screen will display the first setting.
Press
or to change the setting.
Press
to change to the next option.
Press
after the last setting. “DONE” will be
displayed.
The thermostat will return to Normal mode if no button
is pressed in 60 seconds.
Includes Event-Based
™
Air Cleaning
WI-FI SETTING NUMBER
SETTING VALUE
Loading ...
Loading ...
Loading ...