Loading ...
Loading ...
Loading ...
Equipment
Equipment
Bottle holder- freezer compartment
The bottle holders of the freezer compartment are intended for temporary storage of
spirits with a high alcohol content. Beverage without high alcohol should be cooled in the
refrigerator .
Additionally you can store small parts in the bottle holders.
Notice:
Ensure that all ends of a shelf are level.
WARNING!
Bottles and cans may burst! Set a timer that will remind you to remove bottles/cans
without high alcohol content..
Notice:
When the appliance is switched on, it may take up to 12 hours for the correct tempera-
tures to be reached.
20
21
Removable drawer
To remove the drawer out of the refrigerator or freezer
compartment open them to the maximum extent, lift
and remove them.
In order to insert the drawer, the above steps are car-
ried out in reverse order.
1
2 2
Adjustable shelves
The height of the shelves can be adjusted to t your
storage needs.
1. To relocate a shelf, remove it rst by uplifting its
hind edge (1) and pulling it out (2).
2. To reinstall it, put it on the lugs on both sides and
push it to the most rearward position until the rear
of the shelf is xed inside the slots in the sides
Removable door racks/bottle holder
The door racks/bottle holder can be removed for
cleaning:
1. Place hands on each side of the rack/holder and lift
it upwards (1).
2. Pull the door rack/bottle holder out (2).
3. In order to insert the door rack/bottle holder, the
above steps are carried out in reverse order.
1
2
1
Ice cube tray
1. Fill the ice cube tray 3/4 full of water and put it into
one of the freezer storage drawer.
2. Twist the ice cube tray slightly or hold it under ow-
ing water to loosen the ice cubes.
The Light
The LED interior light comes on when the door is opened. The performance of the lights
is not aected by any of the appliances other settings.
Loading ...
Loading ...
Loading ...