Loading ...
Loading ...
Loading ...
#2 Phillips-head screwdriver T-25 torx driver 1/4” nut driver
31
Installation Instructions
REVERSING THE DOOR SWING (if desired)
IMPORTANT NOTES
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for
the doors.
• Normal completion time to reverse the door swing
is 30–60 minutes.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges
IURPWKHULJKWVLGHWRWKHOHIWVLGH³LI\RXHYHUZDQW
to switch them back to the right side, follow these
same instructions and reverse all references
to the left and right.
TOOLS YOU WILL NEED
DOOR PARTS
10 - #8 x 7/8” Screws
(door assembly)
2 - #8 x 1/2” Screws
(striker plate)
6 - #8 x 1/2” Screws
(hinge assembly and
handle spacer)
2 - #8 x 1/2” Screws
(door mask)
2 - #10 x 5/8” Screws
(hinge)
2 - #10 x 5/8” Screws
(panel plug)
1 - #8 x 3/8” Screws
(hinge pin)
2 - Panel Plugs
(on some models)
1 - Door Mask 1 - Chrome Door Cover
Assembly
1 - Handle Spacer
(on some models)
1 - Inner Door
Assembly
BEFORE YOU START
Unplug the dryer from its electrical outlet.
1 - Door Striker
(on some models)
1 - Handle
Spacer/Latch
Assembly
(on some models)
1 - Door Plug
(on some models)
Loading ...
Loading ...
Loading ...