Loading ...
Loading ...
Loading ...
washing a load of laundry _19
GETTING STARTED
1. Load your Washer.
2. Close the door.
3. Press the Power button.
4. Add detergent and additives to the dispenser (see pages 23~24).
5. Select the appropriate cycle and options for the load (see pages 19-20).
6. Press the Start/Pause Button.
7. The Wash Indicator light illuminates.
8. The estimated cycle time appears in the display.
The time may fluctuate to indicate the time remaining in the cycle better.
The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
9. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a
quick drain.
• When the cycle is complete, the Door Lock light goes out and “End” appears in the display.
• DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see
“Loading your Washer” section. (page 18)
• When you restart your Washer after a pause, expect a delay of up to 15 seconds before the cycle
continues.
• Pressing Power cancels the cycle and stops your washer.
• The Wash, Rinse, and Spin indicator lights illuminate during those portions of the cycle.
Do not place anything on top of your washer while it is running.
02 WASHING A LOAD OF LAUNDRY
WARNING
WF241ANW-02832E_EN_v1.indd Sec3:19WF241ANW-02832E_EN_v1.indd Sec3:19 2011-08-10 4:20:512011-08-10 4:20:51
Loading ...
Loading ...
Loading ...