Loading ...
Loading ...
Loading ...
11
Disassembling your blender for cleaning,
care and storage
Step 1.
Always make sure the Breville ikon Hemisphere
TM
Blender is off by pressing the ‘Power’ button on
the control panel. Then unplug the power cord.
Step 2.
Remove the blender pitcher from the motor base
by grabbing the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by turning over the
blender jug and twisting the Blade Removal System
clockwise to unlock, (see fig 1) then lift upwards and
away from the base of the blender jug. The circular
plastic surround attached to the base of the blender
jug is not removable.
Step 4.
The Breville ikon Hemisphere
TM
Blender features
a two part Blade Assembly System for the easy
removal of the blade and jug for cleaning.
Note
Step 11.
• During the blending process, ingredients may
stick to the sides of the blender pitcher. To
push the food back onto the blades, press the
‘Power’ button on the control panel and
remove the power cord. Remove the lid and
use a plastic spatula to scrape down the sides
of the pitcher. Replace the lid before
recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the ‘Power’
button on the control panel, switch off at the
power outlet and remove the power plug.
Remove the blender pitcher. Wipe the motor
base immediately with a dry cloth or paper
towel to absorb the liquid. Check that the
blender pitcher is correctly assembled.
Note
10
The Breville Hemisphere Blender features a motor
over load protection feature. When the motor is
over loaded the motor will stop, the function LED
lights up for few seconds and then unit will go into
standby mode. To restart again unplug from the
outlet let it cool down for 30 minutes or longer.
Note
Use care handling the blades. Remove the silicon
seal from the blade assembly. Place the blade holder
on the counter-top with blades upward. Grip the
lower half of the blade holder around the outer wall
and press downwards in a sharp movement. The
two parts will separate with a click.
Operating your Breville ikon
Hempisphere
TM
Blender
continued
At the end of use, always make sure the Breville
ikon Hemisphere
TM
Blender is turned off by pressing
the ‘Power’ button on the control panel. And then
unplug the cord. Make sure the motor and blades
have completely stopped before attempting to move
the appliance, or when the Breville ikon
Hemisphere
TM
Blender is not in use and before
disassembling, cleaning and storing.
Fig 1
Notch
Notch
BBL550XL_IB_p10-p11.pdf 1 16/03/11 4:07 PM
Loading ...
Loading ...
Loading ...