Loading ...
Loading ...
Loading ...
9
Step 8.
When 60 seconds is reached, the blender will
automatically cease to operate and the selected
speed button and ‘Stop’ button illumination will go
out. The ‘Power’ button will illuminate and flash.
• The ikon Hemisphere
TM
Blender will a
utomatically stop blending after 60 seconds.
This is a safety feature.
• To stop blending at any time, press the ‘Stop’
button or the selected speed button. The
‘Power’ button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go out.
• The maximum amount of ice cubes the blender
can blend at any one time is 1 standard ice
tray or 9 oz. Use Speed 2/Mix.
Note
Step 9.
For ingredients that require short bursts of power,
select the ‘AUTO PULSE’ function. The ‘AUTO PULSE’
button will illuminate and remain illuminated while
the button is pushed. Press the ‘AUTO PULSE’ button
in short bursts until blending is complete.
Use the ‘AUTO PULSE’ button when the food that
is being processed is too thick or coarse to
circulate within the blender pitcher.
Note
Step 10.
The Breville ikon Hemisphere™ Blender features an
additional 'SMOOTHIE' function. This is a pre-
programmed cycle which automatically adjust the
blending time and speeds to optimize blending
results. Select the required function by pressing the
corresponding function button. The blender will start
to operate and the selected function button will
illuminate. The ‘Power’ button will illuminate and
cease to flash. The ‘Stop’ button will illuminate and
flash. When the programmed cycle has finished, the
blender will automatically cease to operate and the
function button and ‘Stop’ button illumination will go
out. The ‘Power’ button will illuminate and flash.
The Breville ikon Hemisphere
TM
Blender features a
patented assist lid. This allows the lid to fit tightly
onto the blender pitcher, avoiding displacement
during operation. The ring pull design allows the
user to easily remove the lid with a simple
leverage action. (See Fig 1)
Note
Step 5.
Plug the power cord into a 110 / 120V power outlet.
Step 6.
Press the ‘Power’ button on the far left of the control
panel to turn the blender on. The ‘Power’ button will
illuminate and flash.
Do not fill the blender pitcher above the ‘MAX’
line. When the blender pitcher is filled at or near
the ‘MAX’ line place one hand on the blender lid
to avoid displacement of the lid during operation.
Note
Step 7.
Select the required speed (1 to 4) by pressing the
corresponding speed button. The blender will start to
operate and the selected speed button will illuminate.
The ‘Power’ button will illuminate and cease to flash.
The ‘Stop’ button will illuminate and flash.
Operate the blender only for the appropriate
amount of time required – do not over process.
Note
8
Fig 1
Operating your Breville ikon
Hempisphere
TM
Blender
continued
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON
HEMISPHERE
TM
BLENDER WHILE THE MOTOR IS RUNNING.
BBL550XL_IB_p8-p9.pdf 1 11/03/11 9:58 AM
Loading ...
Loading ...
Loading ...