Loading ...
Loading ...
Loading ...
Basic Operation & Riding
53
Shifting Gears
3.
Release the rear brake pedal, gradually release the clutch lever/
parking brake lever, and increase engine speed by gradually
opening the throttle.
4.
When the speed increases, close the throttle, pull in the clutch
lever/parking brake lever, shift to 2nd gear by raising the shift
lever, and gradually release the clutch lever/parking brake lever
while gradually opening the throttle.
5.
Repeat this sequence to progressively upshift to 3rd, 4th and 5th
(top) gear.
6.
To downshift, reverse this sequence. Remember to close the
throttle each time you shift to the next lower gear.
Learning when to shift gears comes with experience. Keep the
following tips in mind:
• As a general rule, shift while moving in a straight line.
• Close the throttle and pull the clutch lever/parking brake lever in
completely before shifting. Improper shifting may damage the
engine, transmission, and drivetrain.
• Upshift to a higher gear or reduce throttle before engine rpm
(speed) gets too high. Learn the relationship between engine
sound and the normal shifting points.
• Downshift to a lower gear before you feel the engine laboring
(lugging) at low rpm.
• Avoid downshifting to help slow your ATV when engine rpm is
high. Downshifting when engine speed is near its allowable
maximum may over-rev the engine and possibly cause damage.
• To prevent transmission damage, do not coast or tow the ATV for
long distances with the engine off.
• Your ATV will not stall even if you stop in gear without
disengaging the clutch.
Recommended Shift Points
Ride in the highest gear that lets the engine run and accelerate smoothly.
This will give you good fuel economy and effective emissions control.
Loading ...
Loading ...
Loading ...