Loading ...
Loading ...
Loading ...
en Operating the appliance
28
Note
Note that with the settings ˜:‹‚ and
˜:‹ƒ, the interior light 1" is switched
off. To activate the interior lighting, press
the ON/OFF switch (.If the door is
open for longer than 60 minutes, the
light will switch off automatically.
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button `
until •:‹... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes
and the digital display h displays
the factory setting •:‹….
5. Keep pressing programme
button # until the value ˜:‹... is
indicated on the numerical display
h.
To change the setting:
1. Press programme button 3.
Each time the button is pressed,
the set value increases by one level;
when the value of ˜:‹ƒ has been
reached, the display jumps back
to ˜:‹‹.
2. Press START button `.
The set value is saved.
3. Close the door.
Switching off the appliance
Short time after the end of the
programme:
1. Open the door.
2. Switch off ON/OFF switch (.
3. Turn off the tap (not applicable if
Aqua-Stop fitted).
4. Remove the utensils when they have
cooled down.
About the Eco drying function:
When Eco drying is activated in the
Eco 50° programme, the door opens
automatically when the programme
ends. This ensures the best possible
drying result. Low amounts of steam
may occur. If you install the appliance
under a worktop, fit the supplied steam
lock * (follow the procedures in the
installation instructions). The steam lock
protects sensitive fitted furniture and
worktops from damage by water vapour.
Before opening the appliance, leave it
to cool down for a while in the
remaining programmes when the
programme ends.
In the case of the TurboSpeed 20 min.
programme switch off if no further rinse
cycle is to follow.
* depending on model
Loading ...
Loading ...
Loading ...