Loading ...
Loading ...
Loading ...
16
TROUBLESHOOTING GUIDE
If the clothes dryer does not perform as expected, malfunctions, or an alarm is sounding, please
check the following list of possible solutions.
If a solution cannot be found or the problem persists, please contact Midea service (refer to page 17).
Do not, under any circumstance, dismantle the appliance yourself.
Problem / Error
Possible Cause / Solution
Ÿ Display does not light up
Ÿ Plug is not firmly in socket or power not turned on.
Ÿ Fuse may be blown. Check the power point with another
appliance.
Ÿ Check if a programme has been selected.
Ÿ " " is flashing
Ÿ Water container is full, need to be emptied.
Ÿ Check hose for condensation outlet.
Ÿ " " is flashing
Ÿ Clean filters.
Ÿ Dryer does not start
Ÿ Check if the Start button has been pressed.
Ÿ The dryer door is not properly pushed in.
Ÿ Check if a programme has been selected and it is not in
"Pause" mode.
Ÿ Dryer is opened by itself
Ÿ Check if the dryer is overloaded.
Ÿ Press door until it “clicks” into position.
Ÿ Degree of dryness is not reached
or drying time is too long
Ÿ Check if lint filter and air condenser is clean.
Ÿ Check if water container is full.
Ÿ Check water outlet.
Ÿ Dryer installation too restricted.
Ÿ Clean the moisture sensor.
Ÿ Use next higher drying programme or using Timer programme.
Ÿ “ ” is on
Ÿ Water tank is full, empty the container.
Ÿ Water pump failure or water level sensor failure. Call Midea
Customer Care if the problem persists.
Ÿ “E32”
Ÿ Humidity sensor failure. Call Midea Customer Care if the
problem persists.
Ÿ “E33”
Ÿ Temperature sensor failure. Call Midea Customer Care if the
problem persists.
Loading ...
Loading ...
Loading ...