Loading ...
Loading ...
Loading ...
14
CLEANING & MAINTENANCE
Empty the Water Container
1. Hold and pull out the water container with two hands.
2. Tilt the water container, pour out the condensed water and put the tank back
to its place.
Clean the Filter Door
1. Open the door.
2. Take out the filter door.
3. Clean the filter door: wipe off the scrap threads accumulated on the filter door.
4. Reinstall the filter door.
WARNING:
Ÿ Empty the water container after each use. The programme will be paused and the “ ” icon will flash
if the water container is full during the drying process. After the container is emptied, the dryer can be
restarted by pressing 【Start/Pause】button.
Ÿ Do not drink the condensed water.
Ÿ Do not use the dryer without the water container.
Filter door
Clean the Filter Base
NOTE:
1. The fluff accumulated on the filter will block the air circulation, which will cause the extension of drying
time and waste energy.
2. Do not operate the dryer without the filter.
3. Clean the filter after each use to prevent lint accumulation inside the dryer.
Locking lever
Filter cover
Filter base
1. Open the filter cover.
2. Unscrew both locking levers towards each other.
3. Clean the filter base completely.
4. Re-insert the filter base.
5. Screw both locking levers.
6. Close the filter cover flap until it locks into position.
Ÿ Always disconnect the clothes dryer from the mains power source before performing any maintenance
or cleaning of the appliance.
Ÿ For optimal performance, regular maintenance and cleaning is highly recommended.
Ÿ Regular maintenance will extend the service life of the clothes dryer.
Loading ...
Loading ...
Loading ...